Understanding how your fixture will mount is essential to ordering the right options. Your install situation will largely dictate the mounting options available to you. Some fixtures require special electrical preparation to ensure correct mounting. We recommend reading through our installation instructions with your installer to prepare for delivery day. Below you will find information on each mounting type shown on the product pages:
Cups: 125mm (4.92″) diameter disks designed to universally mount on standard junction boxes. With this mounting style the junction box will need to be specifically mounted in line with one of the suspension wires of the fixture. If this is not possible, we offer custom wire spacing to align the suspension wires with the location of your junction box. The second cup is used for suspension only and can mount directly to the ceiling surface or a second junction box. With this style of mounting the LED driver is located either in the light body itself, or remotely mounted.
Canopy: Wood canopies are made from the same hand selected piece of hardwood as your fixture. Designed specifically for situations with central junction boxes, this mounting option serves a dual purpose. First it provides an avenue for the wiring to route from the central junction box to the fixture. Second, providing an aesthetic termination of the suspension wires, pairing the fixture body nicely to the mounting surface. With this style of mounting the LED driver is housed in the body of the canopy.
Surface: Designed to mount over standard junction boxes, this style of mounting is used primarily for our wall and ceiling sconce line of fixtures. Anchored over the junction box, and fastened to the mounting surface with provided hardware, this mounting style works with a wide range of electrical applications. Compatible with single and double gang junction boxes, along with no junction box at all.
Certification: cULus, a certification obtained through Underwriter Laboratories for conformity to national standards and codes. This certification ensures products are constructed appropriately to the highest level of safety standards.
